Perbandingan Kebutuhan Pergantian Pelat dari Hasil Marking dengan Aktual dan Banyaknya Elektroda yang Dibutuhkan pada Bottom Kapal TK. Pegasus 5

  • Diana Langgeng Universitas Ivet Semarang

Abstract

Every ship's plate will experience thinning or wear due to several factors, thinning of the plate is normal, especially at the bottom of the waterline. Therefore it is necessary to hold maintenance and replating on each part of the ship on a regular basis. Therefore, it is necessary to analyze the plate requirement at the change of the barge plate and how many electrodes are used. The purpose of this study is to determine the estimation of plate requirements based on marking, to find out the difference between the comparison between marking and actual plate requirements, and to determine the needs of electrodes in the process of replacing TK plates. Pegasus 5. Which is used as a reference for determining material so as not to suffer losses and to achieve the effectiveness and efficiency of material use. This research is a quantitative research, in this study there are several variables. Based on the research objectives, the results obtained for the estimation of the use of plates for the replating bottom of the Pegasus 5 barge as many as 10 sheets with a plate size of 6096 x 1828 and a thickness of 12 mm. With a comparison difference of 7.7%, and the number of electrodes needed is 236.032 kg or 48 packs.

References

Dwi Rohma, Dendi. 2018. Pengaruh Variasi Heat Input Pengelasan Smaw pada SS400 Terhadap Sifat Mekanik Impak Temperatur, Kekerasan dan Struktur Mikro. 1–92.

Eka Setyawan, Mas Bagas. 2019. Estimasi Perhitungan Kebutuhan Material, Biaya Replating dan Kebutuhan Jam Orang dalam Proses Reparasi di PT Najatim (Studi Kasus KM. Cengkeh 02).

Imam, Rasyidin. 2019. Inspeksi Pengecekan Ketebalan Bottom Plate Kapal Mv.Gladiolus Sejati di Pengedokan Tanjung Emas Semarang Sesuai Aturan PT. Biro Klasifikasi Indonesia.

Kurniawan, Dadang. 2021. Laporan Praktek Kerja Lapangan di PT. Harapan Teknik Shipyard Replating Bottom Kapal Tongkang Pegasus 5.

Papalangi, Ferlyn et al. 2015. Studi Perancangan Tongkang Pengangkut Limbah Batubara di PLTU Tanjung Jati B Jepara. Jurnal Teknik Perkapalan 3(2).

Priyanda, Rizky. 2016. Kajian Teknis Perubahan Kapal Tongkang Menjadi Kapal Container untuk Mendukung Percepatan Tol Laut.

Sasono, Eko Julianto. 2010. Efektivitas Penggunaan Anoda Korban Paduan Aluminium pada Pelat Baja Kapal AISI 2512 terhadap Laju Korosi di dalam Media Air Laut. Universitas Diponegoro Semarang.

Sihombing, Salomo P, ITS. 2015. Analisa Resiko dan Nilai Ekonomis pada Pengelasan Kombinasi Pipa API 5L X52. Teknik Kelautan ITS.

Yosi Amalia, Prasetyo et al. 2021. Estimasi Kebutuhan Material, Jam Orang dan Biaya Penggantian Plat pada Barge Marine Power 3042. Politeknik Negeri Batam.
Published
2022-08-31
How to Cite
LANGGENG, Diana. Perbandingan Kebutuhan Pergantian Pelat dari Hasil Marking dengan Aktual dan Banyaknya Elektroda yang Dibutuhkan pada Bottom Kapal TK. Pegasus 5. Marine Science and Technology Journal, [S.l.], v. 3, n. 1, p. 27-31, aug. 2022. ISSN 2746-1580. Available at: <https://e-journal.ivet.ac.id/index.php/maristec/article/view/2253>. Date accessed: 28 nov. 2022. doi: https://doi.org/10.31331/maristec.v3i1.2253.